Floating Nightstand with Drawer
A floating nightstand with a working drawer, for the spot where a full bedside table doesn't fit.
Small bedrooms, rented apartments, and anyone who likes a clear floor. It keeps a phone, glasses and a charger off the bed and out of sight, and looks deliberate doing it.
Design A soft-radius shell with a flush top and a recessed finger pull — no handle to bump into, nothing to catch a sleeve. The drawer runs on printed rails with a built-in stop, so it slides out smoothly and will not drop on the floor. The top is wide enough for a phone stood on edge, a small plant, a book or a glass of water.
Dimensions One size: 22 cm wide, 14 cm deep, 8 cm tall (8.7 × 5.5 × 3.1 in). Deep enough to be useful, shallow enough to walk past without noticing.
Finish A matte white frame and top with a walnut wood-look drawer front. The wood-effect filament carries a fine grain that catches the light along the drawer face, so the piece reads as two materials rather than one printed part.
Installation Two concealed screw points sit behind the body — nothing shows from the front or the sides. Hardware for drywall and for wood studs is included, with a paper drilling template. One level line and two screws is the whole job.
Product information
Product information
Made to order
Nothing here sits on a shelf waiting. Each piece is printed after you order it, which is why the colour you choose is the colour you get.
How it's made
Printed one at a time on BambuLab machines, in PLA — a plant-based bioplastic made from corn, and recyclable. Fine layer lines are visible up close on any printed object; that is what tells you it was made rather than moulded.
Care
Rinse and wipe clean with a cloth. Printed parts are not dishwasher-safe and should not be left in a hot car — PLA softens with heat. Colours other than white may fade if the piece lives outdoors.
Shipping
Orders ship from Quebec, usually within 1 to 3 business days.